18/02/2026 - Evening

 18/02/2026 - Evening - Alex Randall, Sam Hill, Trevor Hughes - 2hrs

Horrible conditions on surface so the big skip was left alone. Underground it was found that the power supply to the railway had failed, but after a couple of go's plugging it into a different socket we got it working again.

At the dig face there was a mountain of spoil, mostly blocking the passage to an extent it was still quite fumey down there. This was all bagged up, to reveal that we can now get to and look round the next corner. Unfortunately the passage continues at much the same size and gradient. More promisingly there is a significant echo when shouting down it, so hopefully there is a significant space just round the corner.

The bags were then hauled up to Echo pot, until the winch started protesting at the continuous hard work. With pub time approaching it was decided to leave the last few bags at the bottom and do a bit of hauling on the upper two winches before vacating, so a few bags made it to the 166'. The rest will be hauled next week. 

Comments

Post a Comment

Popular posts from this blog

01/07/2025 - Evening

 01/07/2025 - Alex Randall, Sam Hill, Ed Ford, George Brookes, Hollie London Two big skips surfaced, 2025 total to date: 12 Alex R used a combination of plug and feather and a hammer to remove a lump preventing the lowest ladder from being moved to the left. The aim of this is to align the ladder with the rift above, and install another ladder in the rift to act as a track, so one hoist will be able pull buckets of spoil from the bottom of the ladder to the top of the rift. There are two further lumps that will need removing, but these will require some delicate use of chemicals. The rest of the team worked tirelessly pressing the hoist buttons, with Ed loading the Echo hoist and Sam driving it, and loading the South Pot sled. George and Hollie drove the the South Pot hoist and loaded the big 166' skip. After removing the lump discussed above AR returned to surface, raised the 166' skip and sent it down for refill. Then had to deal with GB inconsiderate parking to empty the dum...
Read more

2025 Round Up - Templeton South Pot - Railway Video!

Although there has been no blog post since 18/11, work in the South Pot has not stopped, with the work to mechanise the lowest haul continuing.  In this time the following have been involved in the work, in no particular order:   - Sam Hill   - Alex Randall  - Mike Kushy  - Hollie London   - 'Mushroom' Dave Kinzlett  - Sam Coleman  - Lee Venning  Thanks to the efforts of the above, the inclined railway track has been completed. This is mainly constructed from a large steel ladder liberated from the surface set up at Homeclose, and scaffold tube braced between the walls of the rift with another pair of tubes perpendicular to these to form the rails. This then ties onto the pre-existing ladder from the bottom of the cave up to the rift, by means of some bent sections of scaff. There is also a 'boat trailer keel roller' fitted here to guide the winch cable over the change in gradient.  The previous team to dig here before...
Read more

26th March 2025

Image
David Morrison (Tuska), Mike Kushy and Alex Randall. MK and DM did some more work at baby Templeton in the morning. Clearing out run in and shaping the surroundings. AR arrived around 1pm ish and we all set to work on wiring up sockets. 2 x outdoor 13amp double plug socket boxes wired up with braided 2.5mm cable, we decided we'd cut and fit the 16amp connection plugs in situ. Fired up the generator and laid the winches (with 13amp plugs fitted), tools, lights (with 13amp plugs) and drill into the sled. AR and MK headed on down to greet the sled. The first winch bracketed onto the original steel great. AR concentrated on fixing the socket box onto the wall with a wooden backing, whilst MK concentrated on cutting the braided wire to length and fitting the 16amp plug to connect into the existing wiring. Went smoothly and lights/winch worked well. We then lowered the 2nd winch, drill and tools down the South pot sled. The steel runners could do with a cleaning up/rubbing back and greas...
Read more